Catalog
Our complete Ø28mm range: Welding Tables
More information
CNC-milled from solid S690QL high-performance steel and gas-nitrided to 800 HV. Gas nitriding hardens the steel from within: the result does not wear away, cannot flake off, and leaves no residue. Fully compatible with the Ø28 mm system from Siegmund and Demmeler.
Choose between EG grid (one hole per position) or DG grid (two holes, up to 60% more clamping options). The 3D model updates live in the configurator.
Knowledge
A Ø28mm welding table is a 3D fixturing table with a grid of Ø28mm holes at 100mm centre-to-centre, on which you clamp workpieces square and dimensionally accurate. DCT CNC-mills them from solid S690QL steel and gas-nitrides them to 800 HV. Fully compatible with Siegmund and Demmeler.
Which welding table size do you need?
Size the table to your largest workpiece plus working room around it. DCT supplies Ø28mm welding tables from 1000×1000 to 3000×2000mm. Every size has a 25 to 27mm top thickness and a scale on one long and one short edge.
Torn between two sizes? Take the larger one: clamping area you do not use costs nothing, area you lack does. In the configurator you set size and grid and watch the price and 3D model update live.
EG or DG grid: what is the difference?
EG means single-hole (one bore per position), DG means double-hole (two bores per position). DG gives up to 60% more clamping options on the same surface, which pays off on complex or angled work. For straightforward positioning, EG is enough and keeps the table more keenly priced.
Where the quality sits: S690QL steel and 800 HV
The tabletop is CNC-milled from solid S690QL, a high-strength steel with a higher tensile strength than the S355J2+N Siegmund uses. It then goes through gas nitriding to 800 HV, a thermochemical process that drives the hardness deep into the steel. The surface stays dimensionally accurate and wear-resistant, even under daily production.
Why a gas-nitrided table is lighter in colour
This is the most common misconception: a DCT table is lighter in colour than a Siegmund, and that does not mean it is less hard. Siegmund applies a BAR coating, a dark oxide layer on top of the steel. DCT uses gas nitriding: the hardness sits up to 800 HV in the steel itself. A separate coating is therefore unnecessary; the surface does not wear away or flake off.
Do Siegmund and Demmeler accessories fit a DCT table?
Yes. The Ø28mm grid is the industry standard, so it works both ways: your existing Siegmund and Demmeler tooling fits a DCT table, and DCT clamps, bolts and squares fit your Siegmund or Demmeler table. You do not have to replace anything to expand.
What does a Ø28mm welding table cost and how fast can you get it?
A Ø28mm welding table starts at €1,800 for a 1000×1000 with an EG grid and runs up to €7,606 for the largest version, tabletop excluding legs. Every price is online without registration. Because DCT ships without dealers, the gap to a comparable Siegmund is substantial.
The tables are in stock in Brummen and usually ship the next working day, with delivery across Europe. For a table you request a quote; on working days you get an answer within 12 hours.
| Ø28mm welding table | |
|---|---|
| Steel | S690QL, high-strength |
| Hardness | 800 HV (gas-nitrided) |
| Hole diameter | Ø28mm |
| Grid spacing | 100mm centre-to-centre |
| Top thickness | 25 to 27mm |
| Compatibility | Siegmund and Demmeler Ø28mm |
Frequently asked questions about Ø28mm welding tables
What does a Ø28mm welding table cost?
- A Ø28mm welding table starts at €1,800 for a 1000×1000 with an EG grid, up to €7,606 for the largest version (tabletop, excluding legs). Every price is online without registration.
Are DCT welding tables compatible with Siegmund and Demmeler?
- Yes. The Ø28mm grid is the industry standard, so your Siegmund and Demmeler tooling fits a DCT table and DCT tooling fits your existing table.
Why is a DCT table lighter in colour than a Siegmund?
- Siegmund applies a BAR coating that darkens the table. DCT uses gas nitriding, where the hardness sits in the steel itself. The lighter colour does not mean less hardness.
What is the difference between an EG and DG grid?
- EG has one hole per position, DG has two. A DG grid gives up to 60% more clamping options on the same surface.
What steel is the table made from?
- Solid S690QL, a high-strength steel, gas-nitrided to 800 HV. The hardness sits in the steel itself, so no coating is needed.
How fast can a table be delivered?
- The tables are in stock in Brummen and usually ship the next working day, with delivery across Europe.